2019 Ford F-150 - Replacing Bulbs

2019  Ford F-150

WARNING: Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury.

Note: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, clean it with rubbing alcohol before installing it.
Accessing the Halogen High Beam, Low Beam and Direction Indicator Bulbs
1. Rotate the steering wheel to the opposite side of the bulb needing replacement.
2. Remove two screws and one push pin from the front of the wheel liner.

3. Pull the wheel liner back towards the tire to gain access to the bulbs.

Replacing the Halogen High Beam

Low Beam and Direction Indicator Bulbs

Replacing the Halogen High Beam, Low Beam and Direction Indicator Bulbs

A.Low beam headlamp bulb.
B.Direction indicator bulb.
C.High beam headlamp bulb.

1. Make sure the headlamps are off.
2. For the high beam and low beam bulbs, remove the rubber cap to access the bulbs.
3. Remove the bulb holder from the lamp assembly by turning it counterclockwise and pulling it straight out.
4. Disconnect the bulb from the electrical connector.
5. Install the new bulb in reverse order.

Replacing Side Marker Bulb

Replacing Side Marker Bulb

 

Make sure the headlamps are off.
With the hood open, locate the side marker on the top of the headlamp assembly.
Remove the bulb holder from the lamp assembly by turning it counterclockwise and pulling it straight out.
Install the new bulb in reverse order.

Replacing Fog Lamp Bulbs

Replacing Fog Lamp Bulbs

 

 1. Make sure the fog lamps are off.
2. Disconnect the electrical connector from the fog lamp bulb.
3. Turn the bulb counterclockwise and remove it from the fog lamp.
4. Install the new bulb in reverse order.

Replacing LED Headlamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.

Replacing LED Fog lamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.

Replacing LED Direction Indicator and Side Marker Bulbs
These lamps have LED bulbs. Contact an authorized dealer.

Replacing Brake, Rear, Direction Indicator and Reverse Lamp Bulbs
1. Make sure the headlamps are off.
2. Open the tailgate to access the rear lamp assemblies

Replacing Brake, Rear, Direction Indicator and Reverse Lamp Bulbs

 

 3. Remove the two bolts from the tail lamp assembly. Then, carefully pull the lamp assembly from the tailgate pillar by releasing the two retaining tabs.
4. Disconnect the electrical connector from the bulb.

A. Brake, rear and direction indicator bulb.
B. Reverse lamp bulb.


Rotate the bulb socket counterclockwise and remove it from the rear lamp assembly.
Install the new bulb in reverse order.
Replacing LED Brake, Rear, Direction Indicator and Reverse Lamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.

Replacing Cargo Lamp and High-mount Brake Lamp Bulbs

1. Make sure the lamps are off.
2. Remove the four screws and move the lamp assembly away from the vehicle to expose the bulb sockets.

Replacing Cargo Lamp and High-mount Brake Lamp Bulbs

Remove the bulb socket by rotating it counterclockwise and pulling it out of the lamp assembly.
Pull the bulb straight out of the socket.
Install the new bulb in reverse order.
Replacing LED Cargo Lamp, Spot Lamp and High-mount Brake Lamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.

Replacing the License Plate Lamp Bulb

Note: The license plate bulbs are behind the rear bumper.

Replacing the License Plate Lamp Bulb

 

 Reach behind the rear bumper to locate the bulb.
Twist the bulb socket counterclockwise and carefully pull to remove it from the lamp assembly.
Pull the bulb straight out of the socket.
Install the new bulb in reverse order.
Replacing Exterior Mounted Mirror Direction Indicator Lamp Bulbs
These lamps have LED bulbs. Contact an authorized dealer.