Headlights (models with LED headlights)
1. Disconnect the electrical connector from the bulb.
2. Remove the bulb from the headlight assembly by turning it counterclockwise.
3. Replace the bulb with new one. At this time, use care not to touch the bulb surface.
4. To install the bulb to the headlight assembly, turn it clockwise until it clicks.
5. Reconnect the electrical connector.
 |
Front turn signal light
1. Turn the socket counterclockwise and pull it out.
2. Pull out the bulb from the socket and replace the bulb with a new one.
2. Pull out the bulb from the socket and replace the bulb with a new one.
 |
Front turn signal light
|
Front fog light (Outback - if equipped)
1. Remove the clips.
2. Turn over the mud guard.
3. Disconnect the electrical connector.
4. Remove the bulb.
5. Replace the bulb with a new one.
6. After replacing the bulb, reattach the mud guard.
2. Turn over the mud guard.
3. Disconnect the electrical connector.
4. Remove the bulb.
5. Replace the bulb with a new one.
6. After replacing the bulb, reattach the mud guard.
 |
| Front fog light replacement |
No comments:
Post a Comment